行走减速机用摆线马达

结构特点 
采用镶柱式定转子设计，具有更高的配油精度及机械效率。 
? 双滚动轴承设计,具有更大的侧向承载能力。 
?**的轴密封设计，承受背压高，可以串并联使用。 
? 正反转换向方便、转速平稳。 
? 多种油口、输出轴、法兰等连接形式。 
  
Characteristic features： 
?It adapts the gerolor design, which has a higher distribution accuracy and Mechanical efficiency. 
?Double-rolling bearing design, which has a greater lateral load capacity. 
?Credible design of shaft seal, which can bear higher pressure and be used in parallel or in series. 
?Direction of shaft rotation and speed can be controlled easily and smoothly. 
?A variety of connection types of flange; Rabbet:, output shaft and oil port. 主要性能参数 Main Specification 1.较大工作压力指入口较大压力，额定压力指工作压差。 

2.马达不能同时在较大压力和较高转速下工作。 
3.在断续工作条件下，运行时间每分钟不得**过10%。 
4.**用68#抗磨液压油，粘度37-73cSt,清洁度ISO18/13。 
5.较高工作油温80°。 
6.马达全负荷工作前，应在较高工作压力的40%以下磨合1小时。 
7.马达允许较高背压10MPa，但建议不要**过5MPa，**过时应接外泄油管. 
  
1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure 
2. Motor should not work under the highest pressure and the maximum speed 
3. The running time should not exceed 10% under intermittent working conditions 
4. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13. 
5. The Maximum working temperature is 80 ° 
6. One hour running time under 40% of maximum working pressure is recommended before full capacity working. 
7. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa.a leaking pipes is needed when exceeding BM4 系列连接尺寸----外形图 Dimension and Mounting data BM4系列订货信息 Ordering Information BM4 Ordering Information  
BM4摆线马达订货信息中选定型号及产品编号，点击下载选型！！！
注：客户订货根据上图中参考尺寸，在BM4马达订货信息中选定型号及产品编号；如所需订货规格查找不到相应连接尺寸和产品编号，请与公司市场部联系。电话： 李庆彬
motor stylebook-2012.rar
已压缩的文档 [3.9 MB]
文件下载 
关于本站 | 隐私协议 | 打印版本 | 网站地图